 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MODEL 6143, 6163 7/8" Diameter Single Turn Conductive Plastic Precision Potentiometer / Position Sensor MODEL STYLES 2 6143 6163 ELECTRICAL 1/8" Shaft, Bronze Sleeve Bearing 1/8" Shaft, Ball Bearing Resistance Range, Ohms Standard Resistance Tolerance Minimum Practical Resistance Tolerance Independent Linearity* Minimum Practical Independent Linearity Input Voltage, Maximum Power Rating, Watts Dielectric Strength Insulation Resistance, Minimum Output Smoothness, Maximum Actual Electrical Travel, Nominal Electrical Continuity Travel, Minimum End Voltage, Maximum Resolution Temperature Coefficient** Specifications subject to change without notice. * Linearity is measured between 1% and 99% of input voltage. ** Special tempco available to 100ppm/C. 1K to 100K 10% 5% 1.0% 0.5% 400Vdc not to exceed power rating 1.0 at 70C derating to 0 at 125C 750V rms 1,000 Megohms 0.1% 340 350 0.5% of Input Voltage Essentially infinite -800 ppm/C 2-59 Model 6143, 6163 ENVIRONMENTAL (MIL-R-39023) Operating Temperature Range Temperature Cycling Shock, 6ms Sawtooth Vibration Moisture Resistance High Temperature Exposure Rotational Life Rotational Load Life MECHANICAL Static: -65C to +125C Dynamic: -40C to +125C 5 cycles, -65C to +125C (10% R) 100G's (0.1ms discontinuity max.) 10G's, 10 to 500 Hz (2% R, 0.1ms discontinuity max.) Five 24 hour cycles (10% R) 1,000 hours at 125C (0.5% R) 6143: 6163: 10 mil. shaft rev. 25 mil. shaft rev. 5 mil. shaft rev. at rated wattage at 70C (10% R) Total Mechanical Travel Number of Gangs, Maximum Weight, Nominal Shaft Runout, T.I.R., Maximum Pilot Diameter Runout, T.I.R., Maximum Lateral Runout, T.I.R., Maximum Shaft Radial Play, Maximum Start/Run Torque, Maximum Bearing Type STANDARD RESISTANCE VALUES, OHMS 6143 .003" .005" .005" .005" 0.6 oz.-in. Bronze Sleeve Bearing 360 continuous 1 0.46 oz. 6163 .003" .003" .003" .005" 0.5 oz.-in. Ball Bearing 1K 2K 5K 10K 20K 50K METRIC CONVERSIONS 1 in. 1 oz. 25.4 mm 28.4 gm 1 oz.-in. 1 lb.-in. 0,007 N-m 0,113 N-m 2-60 Model 6143, 6163 OUTLINE DIMENSIONS (Inch/mm) Mounting Surface .595.015 15.10.38 .500 12.7 Max. .500.031 12.70.79 Adjustment Slot (Optional) .032.005 .032.005 Deep Wide x 0.810.13 0.810.13 2 455 Typ. CW CCW .840.005 Dia. 21.30.13 +.0000 -.0005 Dia. +0.0000 19.050 -0.0127 .7500 .875.005 Dia. 22.20.13 Slider .187.015 R. 4.750.38 .750.005 Dia. 19.10.13 .062.005 1.580.13 .062.005 1.580.13 .062.005 1.580.13 Chamfer .010.005 Max. x 45 0.250.13 +.0000 .1248 -.0003 Dia. +0.000 3.170 -0.008 2-61 Model 6143, 6163 SPECIAL FEATURES Linearity Tape Flatted Shaft Slotted Shaft ORDERING INFORMATION LT FS SS 2 6163 Model Series 6143 - Bronze Sleeve Bearing 6163 - Ball Bearing Resistance Prefix Resistance Value R 10K T5 L 1.0 XX Optional Special Feature Code Linearity Optional Non-Standard Tolerance CIRCUIT DIAGRAM NOTES Metric equivalents, based on 1 inch = 25.4mm are rounded to the same number of significant figures as in the original English units and are provided for general information only. (S) (CCW) (CW) INCH mm Tolerances unless otherwise specified: Linear = .01 inches (.25mm) Angular = 2 degrees 2-62 Model 6143, 6163 |
Price & Availability of 6163R5KT5L10XX
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |